Extract rounded off, rusted tight or painted-over bolts. Reverse spiral flutes are designed to bite down to provide maximum gripping power. High carbon steel ensures longer life and greater durability. Universal lobular design fits all types of fasteners. Set includes bolt extractors to remove bolts size of 8 mm, 10 mm, 11 mm, 3/16 in, 1/4 in, 5/16 in, 3/8 in, 7/16 in, 1/2 in with 1/4 in drive.

ELECTRICAN HOLE SAW SET 19PCS

Powerful single shot, hammer driven powder actuated tool. Fastens wood to cement, metal to cement or metal to metal. Instantly drives fasteners into place with a single blow of a 1 lb hammer. Uses standard 0.22 caliber medium load single shot powder loads. Quiet, shock absorbing system lowers recoil for operator comfort. Funnel-shaped handle provides a large target while protecting hands. Positive barrel and load retention prevents barrel from opening freely, allowing easy horizontal and overhead fasting. Pin capacity of 2-1/2 in (3 in with washer).

Quick, easy change-out in production use with S2 tool steel construction and a Rockwell hardness between 58-62. Used in high torque applications, 1/4 in hex drive.

Straight flutes are ground to provide rapid chip removal for efficient threading also for hand threading work in a variety of materials. Taps produce a class 2B thread. Used in applications such as routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical.

Liquid metal technology and dura-pitch tooth design combines speed and durability. Perma-shield non-stick coating protects from corrosion while reducing friction and heat, demolition body.

FREUD ROUTER BIT FACE MOLDING1-1

Made of high-grade S2 tool steel and milled for precise fit. Specifically built for the higher torque requirements of power tools, can be used with drill chuck or quick change chuck adapter in applications such as appliance, automotive, aviation, decking, drywall, electronics, furniture assembly, general construction and HVACR, 1/4 in hex shank.

High-speed steel with black oxide treatment that reduces friction between bit and workpiece. Split point starts on contact in metal, wood and plastic; eliminates walking or skating when drilling into metal; 135 deg split point on all bits above 1/8 in ; jobber length.

HIGH SPEED BIT 17/64

These drill bits have an AlTiN coating that protects them from wear when drilling hard and abrasive materials. It is more resistant to high heat than a TiAlN coating. These bits have spiral flutes that evacuate chips as the bits drill into a workpiece, and they have a straight shank that installs into a drill chuck or similar toolholder.

Medium Duty 1/2" Keyless Steel Chuck | M14 x 1-1/2" UNF Mount without
Collar
Easier Tightening Ergonomic design increases comfort and performance | More Grip Torque-Users can apply more input torque, therefore more output torque is applied to the bit | This chuck has hardened jaws for high gripping torque which prevents slippage when hammer drilling
Avoid bit slippage and enhances wear resistance--even in the most demanding applications | Recommended for professional grade AC/DC/Pneumatic Rotary/Hammer Drills
Tightened and released by hand, allows more rapid tooling changes to increase machining productivity | A self-tightening chuck feature produces significantly higher gripping force to resist tool shank slippage
Our Chucks can be counted on for extremely high reliability and durability under the most demanding machining conditions | All components exposed to wear are completely hardened to maintain accuracy and extend chuck life

APEX 1/4DR STD SOCKET 1/2 6PT

Gearwrench 80123 1/4" Drive 6 Point Deep SAE Socket 1/2" is engineered for superior durability and strength. Made from high-quality alloy steel, it features an off-corner loading design that reduces fastener rounding and a chamfered opening that helps guide fasteners into place. The socket's deep serration ensures a secure grip on fasteners, while the hard-stamped size markings and double line (SAE) and knurled (metric) ring make identification easy.

Features:

Off-corner loading design reduces fastener rounding.
Chamfered opening quickly guides fasteners into the socket.
Serration depth holds fasteners securely in the correct position.
Hard stamped size markings for easy identification.
Double line (SAE) and knurled (metric) ring help easily identify standard and metric sockets.
Bright, full polish chrome finish resists corrosion and is easy to clean.
Meets or exceeds ASME specifications.

Benefits:

Provides a strong, secure grip on fasteners for ease of use.
Resists corrosion for long-lasting performance.
Ensures quick and easy identification of sockets for efficiency.
Built to meet or exceed professional standards for reliability.

Technical Specifications:

APEX 1/4DR STD SOCKET 10MM 6PT